Although the truck didn't...
Although the truck didn't really look anything like it does today, Cynthia could see the truck's potential.
Ever since the first time that cynthia diaz laid eyes on a slammed dualie, she knew that one day she would own one. but, she wouldn't be satisfied with any old lowered dualie rockin' puny 16-1/2-inch wheels and a static drop. cynthia was shooting for something a little more extreme-like the trucks she was used to seeing at her husband's shop. for those who don't know, cynthia's husband is alfredo diaz, the owner of dima wheels, the company that makes those really trick 22- and 24-inch dualie wheels
After showing an interest in having her own truck, alfredo surprised his wife one day when he brought home this '92 chevrolet dualie. although the truck didn't really look anything like it does today, cynthia could see the truck's potential. and thanks to mark over at slaughter house, it didn't take long for the truck to realize some of that potential. mark started off by swapping out the factory rear axle with a narrower unit from a gm cab and chassis, and building a set of custom front hangers to mount the custom two-link. mark also step-notched the frame, built custom airbag mounts and shock mounts, and mounted the air storage tanks, a pair of thomas 337 air compressors, and a set of gc 250 valves under the bed. up front, the factory spindles were replaced with a pair of belltech drop spindles, and a set of firestone 26c air springs was installed in place of the factory coil springs. custom outboard shock mounts were welded into place, and a pair of gabriel shocks was bolted into place.
With all of the fabrication work and part swapping out of the way, mark plumbed the air system with copper tubing, wired up the switches, and installed the firestone dual-needle gauge. once the new air-ride suspension was completed, six new dima aztec 22-inch dualie wheels, wrapped in 265/35r22 kumho tires, were bolted to the corners.
As soon as the air suspension was complete, the truck was shipped off to galvan designs for some body mods and a slick new paintjob. up front, the factory chevy front clip was swapped out for a cadillac escalade front end. a little further back, the door handles were shaved, a power sunroof was installed, and the antenna was frenched into the rear cab corner. at the rear of the truck, the factory taillights were shaved and replaced with a set of cadillac taillights and a tailgate skin/roll pan combo with a license plate box welded into place. inside the bed, a set of larger wheeltubs and a raised section of floor above the step-notch were added, before the new wood bed floor was added, and a new snuglid bedcover was installed. after the truck was block-sanded to perfection, the diamond white pearl ppg basecoat was sprayed over every square inch of the truck, and an ice-blue tribal band and magenta flames were laid over the white base color. before the final coat of clear was applied, some very tasteful pinstriping was added to the hood, and a cadillac emblem was airbrushed onto the back of the truck.
The truck's interior has been given the same amount of attention as the rest of the truck, with custom one-off parts and a ton of upgrades. it started with stripping the armrests off of the door panels, replacing the factory front seats with a pair of mercedes-benz buckets, and installing an alpine audio/video system, thanks to the crew at innovative sounds. then, the dash and all of the interior panels were wrapped in gray tweed, and many of the interior trim pieces were painted white to match the truck's exterior. meanwhile, the front and rear seats were wrapped in gray leather with snakeskin inserts. the finishing interior touches, such as a custom billet steering wheel that was cut at dima to match the aztec wheels, a billet shifter, and a set of gauges in a custom a-pillar pod, really bring the truck's exterior style inside the truck.
Under the hood, the factory 5.7l powerplant has been fit with a high-output alternator, to keep the dual batteries fully charged, a high-flow air cleaner, and a custom high-flow exhaust system. you will also find a set of custom inner fenders, dual battery trays, and a warmed-over 700-r4 transmission.
Since its completion, cynthia has been using her truck to help promote dima wheels at shows all over the united states while raking in the trophies. cynthia would like to thank mark from slaughter house, steve from innovative sounds, the crew at galvan designs, and the members of ground zero for all of their help in completing the truck. and a very special thanks goes out to her husband, alfredo, for getting her involved in his hobby and helping to put together this badass hauler.
The factory front seats have...
The factory front seats have been replaced by this pair of Mercedes-Benz bucket seats and have been re-covered in gray leather with snakeskin inserts to match the rear bench seat.
The factory rear inner fenders...
The factory rear inner fenders had to be replaced with a much larger set of wheeltubs to make room for the much-larger 22-inch wheels and tires. The center of the bed floor was also raised to make room for the rear suspension before the new hardwood bed floor was installed.
Cynthia's truck rolls on a...
Cynthia's truck rolls on a set of 22x8.5-inch Dima Aztec wheels-custom-made by her husband, Alfredo Diaz-wrapped in 265/35R22 Kumho tires.