Jude Souza • Lemoore, California
'72 Chevy C10
We cover all kinds of custom trucks here at Sport Truck. The mild ones are usually built with bolt-on parts, while the middle ground customs usually include a few subtle body mods and mild paint. Then there are trucks like this '72 C10 owned by Jude Souza. Every single piece of metal on this C10 has been cut, reshaped, and put back together to create a fully custom, one-of-a-kind truck. Jude has been into trucks since the day his dad gave him a '66 Dodge Sweptline. That truck lit the fuse on what was going to become a custom truck firecracker. Jude has a love for the classic trucks and said he really doesn't like the late-model stuff. We asked him why he built a truck this modified and he responded, "The original plan was to build a nice driver that I could enjoy and later pass down to my kids—that was until I hooked up with Brandon Sisco. After I saw Brandon's concept of what the truck could look like, I said go for it. Now I have something truly different."
Over the seven years it took to build this truck, a lot of stuff happened. Not only did the top get chopped, the bed get shortened, and cab get leaned forward, it also survived two horrific shop fires. Luckily the truck survived the fires instead of burning down before it could see the light of day. Jude and Brandon Sisco worked together forming ideas with the same conclusion in mind: a straight, all black exterior laid out over big billets. As you can see from the pictures, that is exactly what happened.
When we asked Jude what was the best and worst part of the build he said, "It was meeting all the new people who were involved with the build. Driving it for the first time and getting all kinds of thumbs up wasn't a bad feeling either. The worst part had to be going way past my original plan of it being a daily driver and hearing from all of my friends, "When is it going to be done?"
As custom trucks go, this one will leave a lasting impression on anyone who gets to see it in person. It obviously took a lot of time, effort, and money to build it, so we wanted to know what would Jude do differently.
"The one thing I would have done different is taking it to Brandon from the start. I didn't know exactly what I wanted in the beginning, so I wasted money doing stupid stuff. Once I dropped it off to Brandon, told him to go for it, and returned a few days later to see what he was doing, I knew we were on the same page. I wanted a lot of custom stuff that didn't all show. Brandon told me all the stuff he had planned, and I told him great, as long as the truck is black. I don't want to hide anything with multicolored graphics or flames. I guess I wanted something subtle in the beginning, but this truck is far from subtle now, and I love it. I can always build a bike to putt around on."
There are a ton of body mods on this truck; some can be spotted a mile away like the 2 1/2 inches missing from the top, the super-short bed, and leaned-forward cab. Others are a little harder to spot like the leaned-forward rear wheelwells and the one-piece hood and cowl. Not only were the hood and cowl joined, a 1-1/2-inch section was taken out of the side to lower its profile. The crown of the roof was flattened out a bit and the drip rails shaved off. Removing the drip rails on one of these trucks is not that easy of a task as there are three and sometimes four layers of sheetmetal to deal with. Also, once the drip rails are gone the roof overhangs the windshield by about an inch, so it took some forethought to make it all look right. Brandon Sisco did an excellent job modifying the lines of the C10 without it becoming an eyesore.
'74 350ci V-8 / Edelbrock intake and cam / Vortech heads / MSD HEI-style distributor / Hedman Hedders / Griffin aluminum radiator with dual fans / Cool-Flex radiator hoses / fiberglass engine cover / March pulleys / custom dual exhaust system with polished mufflers / 700R4 transmission with a B&M shift kit / 12-bolt Posi rearend with 4.56 gears and a billet cover / 15-gallon fuel cell
By: Brandon Sisco, Exeter, California, and Quality Muffler, Visalia, California
Front: 20x8.5 Boyd Coddington Harm
Rear: 20x10 Boyd Coddington Harm
Front: 255/35ZR20 Pirelli P-Zero
Rear: 295/30ZR20 Pirelli P-Zero
Front: Belltech 3-inch drop spindles / Firestone 2600 'bags with 1/2-inch ports / Nitro Drop shocks
Rear: Four-link with wishbone-style upper link bar / Firestone 2500 'bags with 1/2-inch ports
Accessories: Dual Optima batteries in the bed floor / 3/8-inch valves / two Viar 480C compressors / 1/2-inch air line / polished 5-gallon stainless steel tank / underfloor brake booster
Chassis: Front frame section Z'd 2 1/2 inches / 2x4 back half / custom-fabricated motor and trans mounts to lower the drivetrain in the chassis / sectioned crossmember / ports in the frame to allow exhaust system to pass through and run on out the side of frame
By: Brandon Sisco and S.I.K., Lemoore, California (back half)
The engine that is lurking under the slick one-piece cover is a mild 350 fitted with a lum
Custom-made front inner fenders / shaved firewall, front turn signals, marker lights, side trim, door handles, mirrors, emblems, wipers, drip rails, tailgate, gas filler neck, antenna, stake pockets, and bumpers / 2-1/2-inch chop top with 2-inch forward lean at the pillars / 1-inch section removed from crown of roof / hood sectioned 1 1/2 inches / three-piece grille shell welded together and re-chromed / Trenz phantom billet grille / custom-made front rollpan / hood and wiper cowl welded together / forward tilt hood / bed shortened to five feet / smooth steel floor / hinged notch cover / Grant Kustoms tailgate and rollpan skin combo leaned forward 2 inches / rear wheel openings leaned forward to match fronts / taillights cut to fullsize and custom lenses made / rounded door and hood corners / custom one-piece door glass conversion / custom steel dash
By: Brandon Sisco
PPG Hummer Black
By: Danny Furman, Hanford, California
'62 Impala bench seat highly modified and covered in black leather / seat backs recessed into back of cab wall / '63 Chevy truck door handles / Jaguar E-Type arm rests / custom door panels with chrome accents to match seat / custom-fit loop carpet / Classic Instrument gauges in custom dash / shaved sun visors, cab seams, and mirror / polished stainless steel Flaming River steering column / billet window and airbag switches in the dash / Lokar billet pedals / Ron Francis wiring harness
By: Brandon Sisco and Raul Espinosa
The bedfloor has been smoothed out and made to open to gain access to the aluminum fuel ce
The original grille on these trucks was made from three pieces, but for a smoother look al
Kenwood DDX 7017 head unit / JL Audio 6-1/2 components in hand-made fiberglass kick panels / two JL Audio 12-inch subs in custom fiberglass enclosure / JL Audio 4300 amp
By: Bill at Performance Sound, Visalia, California and Raul Espinosa
To everyone involved in the build: Danny for the slick paintjob, Raul for the clean and simple interior, Scott for cutting all the glass, and Brandon Sisco for pulling it all together and doing everything else