Chris Sainz is one of those guys who is living the it's-better-late-than-never lifestyle. He grew up always liking custom trucks but never actually had the chance to work on one. Instead, he spent his days starting a business and being a typical American. Starting a business for a lot of people is not easy because it takes an immense amount of time and dedication, and Chris had to shelve his dream of building a truck. After a few years, he found himself in an odd situation. Time was no longer of the essence, and every minute and dollar didn't have to be spent on the business. So, what's a man to do? Chris knew exactly what to do: Pull his dream of building a truck off the shelf and in a blinding fury built this custom. With the guidance of a few friends, Chris was well ahead of the learning curve and wasted no time in changing his ideas into reality.

The chassis of Chris' hauler has been treated to a list of no-nonsense modifications to get the truck low and to keep it riding like a luxury car. With the help of Kevin at Grunion Fab, the front suspension was fit with Belltech drop spindles, Firestone industrial airbags, and a set of custom shock mounts, and the frame was notched for the tie rods. Out back, the framerails were stepped up with a low-profile step notch, and Grunion's chrome-moly parallel four-link was installed with another pair of Firestone industrial airbags and a pair of shocks. The air suspension was plumbed into two 5-gallon storage tanks and a pair of Air-Zenith 12-volt air compressors. The new stance is perfect for hugging the 20- and 22-inch Bonspeed wheels, wrapped in Yokohama Parada tires.

The sheetmetal of this hauler has seen its fair share of modifications to ensure that it looked slick and smooth before the paint was applied. Antonio Sease shaved and relocated the tailgate handle, molded in a steel roll pan, and swapped the factory hood for a cowl-induction piece from Reflexxion, along with a Street Scene wiper cowl. Then, the truck was rolled into the paint booth and taped off for a set of Brandy Wine flames and pinstriped with House of Kolor Red and Black. After Chris got his truck back, it was finally time for all of the goodies waiting to be installed. He installed a billet grille from Trenz, along with the bumper and lower valance, and he swapped out the side-view mirrors for a set of Street Scene sport mirrors with turn signals. Matrix lighting replaces the run-of-the-mill factory lights, and Grippin billet door handles finish off the exterior without going overboard.

Under the hood, Chris has added some performance goodies, as well as a host of shiny accessories to dress things up a bit. In the go-fast department, he bolted up an AEM Brute Force air-induction intake, a high-flow air filter, and combined with Gibson stainless steel headers, a custom exhaust with a single-in, dual-out Flowmaster muffler. In the process, he also added a chrome-plated alternator, an Optima battery, and a set of Billet Specialties polished billet caps.

In the creature comfort department, it is apparent that Chris wanted the interior to look extra special. He called up the guys at The Interior Shop in Phoenix and penciled in a time that he could bring the truck down. Once there, Chris sat down with Todd Jubert and Big D, and he decided on the look, materials, and what stereo components he was going to have installed. Todd started off by constructing the center console that resides between the leather- and suede-trimmed bucket seats that house two JL Audio 10W3 subwoofers. Once inside and looking up, you will see another handcrafted console attached to the headliner with pinstriped flames and wrapped in more suede. Chris accented the cowhide landscape by adding color on the door panels, the dash, and the center consoles. The bed received the same treatment, with a custom sub enclosure that matches the center console inside the cab and houses two more JL subs and a 15-inch video monitor. Attached to the underside of the tonneau cover, Todd built a custom pod that was painted and pinstriped to hold two 7-inch Icon monitors. Todd laid down more pinstripe flames before everything was covered in more suede. After Todd wrapped everything up, the truck was handed over to Chuck Jubert. He runs The Billet Shop in Phoenix, and he milled an army of aluminum dash inserts and speakers covers, polishing them to a perfect finish before they were installed.

One thing Chris really enjoys about his truck is that it gives him time to spend with his fellow enthusiasts. Our sources tell us that Chris has been petitioning the Arizona chapter of Negative Camber for really long time. He has shown the values and the desire that it takes to display the NC logo; he just doesn't know it yet. As you read this, Chris should have noticed the logo that was secretly placed on his window, but if not...surprise!

The 411

Owner/hometown:
Chris Sainz / Phoenix, Arizona

Year/make/model:
'04 GMC Sierra

Engine/drivetrain:
5.3L V-8 / AEM polished Brute Force air-induction intake / Gibson stainless steel headers / Billet Specialties fuse cover, power steering, oil, radiator, master cylinder, and washer fluid caps / Flowmaster exhaust / painted engine cover and fan shroud
By: B&M Muffler of Tolleson, Arizona / Grunion Fabrication of Phoenix

Rims:
Front: 20x9-inch Bonspeed Palisades with Brandy Wine candy inserts
Rear: 22x9-inch Bonspeed Palisades with Brandy Wine candy inserts

Tires:
Front: Yokohama 255/40R20 Parada
Rear: Yokohama 265/40R20 Parada

Suspension:
Front: Belltech drop spindles / Firestone 224C air springs
Rear: Grunion Fabrication Parallel chrome-moly four-link / Firestone 224C air springs
Accessories: Two 5-gallon chrome air tanks / eight Aspo air valves / two Air-Zenith air compressors
Chassis: Notched framerails for tie rods / raised transmission crossmember / low-profile step notch
BY: Grunion Fabrication

Body Mods:
Shaved tailgate / molded roll pan / Trenz billet grille, bumper grille, and lower valance / Reflexxion cowl hood / Matrix headlights, marker lights, and taillights / Street Scene sport mirrors and wiper cowl / Grippin Billet Sickle door handles
BY: Antonio Sease of Buckeye, Arizona / Chris Sainz

Custom Paint:
House of Kolor Brandy Wine candy, Red, and Black
BY: Antonio Sease / Rob Olin of Olin Designs of Phoenix

Interior:
Custom center console / custom console in headliner / pinstriped flames in the headliner, door panels, and bedliner / leather- and suede-wrapped stock seats / black carpeting / Escalade door handles / Nu-Image gauges / top half of the dash is suede and the lower half and bezels are painted silver birch / billet trim throughout / billet flame steering wheel
BY: The Interior Shop of Phoenix / The Billet Shop of Phoenix

Audio/video:
Panasonic 7-inch fold-out DVD head unit / three sets of JL Audio 6.5-inch components / two JL Audio 300-watt amplifiers / four JL Audio 10W3 10-inch subwoofers / two JL Audio 500-watt amplifiers / four Icon monitors and one 15-inch monitor
BY: The Interior Shop

CLUB:
Negative Camber

Special Thanks:
His mom and dad, Tony, Michael, The Interior Shop, The Billet Shop, Kevin Brumfield at Grunion Fabrication, Todd and Chuck Jubert, Rob

  • «
  • |
  • 1
  • |
  • 2
  • |
  • View Full Article