E-Z Air
Chassistech's E-Z Air plug-'n'-play system makes air suspension installation easier. Features include a 3/4hp compressor, eight valves mounted on a manifold, and a 3-gallon aluminum tank. This E-Z Air unit enables speedy installation and easy access to various air components. All you do is plug in the provided battery and ignition wires, because everything else is pre-wired.
Chassistech
(800) 682-8789www.airbagit.com

No More Chips
Fender Gripper now has new fender covers to protect the delicate paint of your truck while you are wrenching away. Made of non-slip material, these soft, cushioned covers will not slide off slick surfaces. They are completely washable and are impervious to motor oil, coolant, lacquer thinner, brake fluid, and so on. Check out the website to see all of the different logos they offer for these covers.
Fender Gripper
(800) 284-7777www.ssnake-oyl.com

Stepside Shine
Looking for more billet accessories for your '88-'98 fullsize GM Stepside truck? C/K Resto offers several new billet step plates to replace your faded or worn plastic ones, featuring all-new looks with a smoothie, flamed, Bow Tie logo or with rubber step pads, all in a high-polish finish. Factory replacement plastic step plates are also available.
C/K Resto
(866) 507-8871www.ckresto.com

Make It Loud
The AS-series from Audiobahn features blue 13mm Mylar dome tweeters that are removable for remote mounting and better imaging. Optional 20mm silk dome tweeters are also available, giving you more alternatives in choosing the correct sound. Capable of handling as much as 200 watts, these full-range component speakers offer a wide-ranging assortment of options to cater to most installation environments.
Audiobahn
(800) 488-8595www.audiobahn.com

Take the Air With You
Viair's new Onboard Air Systems save you time and frustration by putting everything you need in one box. Each system comes with everything you need, including a compressor, an air tank, fittings, a pressure switch with relay, wiring, electrical parts, a dash panel monitor, and detailed instructions complete with tips for a flawless installation.
Viair Corp.
(949) 582-6868www.viaircorp.com

No More Belt Slip
ATI is now making a line of supercharger conversion kits for the ATI Super Damper. If you are making more than 8 pounds of boost and have belt-slip problems, ATI has the fix for your LS-X-based engine. ATI is now offering 8-, 10-, and 12-rib kits, as well as an HTD cog-drive blower driver kit for your Super Damper and all of the accessory drives. Stop worrying about belt tensioners holding up and small belts pulling their weight. If you need to make real boost, then check out the supercharger drive kits.
ATI Performance Products
(800) 284-3433www.atiracing.com

Hang On to That Wheel
Controlling a lifted '03-and-later Dodge Ram 2500/3500 on the road just got a whole lot easier with the introduction of the new Extreme Drop pitman arm from Kelderman. When installing a lift kit, this exclusive component allows you to raise your truck 8 to 10 inches, while retaining the Ram's stock steering feel and capability. This is essential for safe handling and maximum enjoyment of your truck. The pitman arm installs with common tools and is compatible with most available lifts.
Kelderman Mfg.
(800) 334-6150www.keldermanmfg.com

Big or Bigger, You Decide
If you own an '07 Chevy/GMC 2WD pickup or SUV and want more stature, then check out one of Superlift's kits. For mild leveling, the company offers a 2-1/2-inch front kit that uses either preload rings under the factory coils or replacement high-pressure-gas Superlift monotube shocks with the factory coils. For more elevation, you can pick up the 6-inch kit that uses high-clearance, one-piece lower control-arm crossmembers, combined with replacement cast ductile iron knuckles. Rear lift options are 5-inch tapered blocks or Superide replacement springs.
Superlift Suspension Systems
(800) 551-4955www.superlift.com

  • «
  • |
  • 1
  • |
  • 2
  • |
  • View Full Article