Sport Truck Homepage
Custom Truck Parts September 2009 Wheel

Speed Shop - Custom Truck Parts - September 2009

Speed Shop
By Calin Head
Photography by Calin Head
Custom Truck Parts September 2009 Center Line Wheel
1. Light Wheels
Designed and tested for the true racer and street performance enthusiast, Center Line has a new line of light rims. The rims are one-piece rotary-forged billet aluminum, which is 30-percent lighter than conventional castings. There are four new styles to be had in 15, 16, 17, 18, and 20-inch diameters (many widths, with custom backspace are available.) So if you want to go fast and look good doing it, check out Center Line’s website for more info.
Center line Wheels
(800) 345-8671
www.centerlinewheels.com

Custom Truck Parts September 2009 Rim Custom Truck Parts September 2009 Billet Rim Custom Truck Parts September 2009 Wheel
Custom Truck Parts September 2009 Muffler Cover
2. No More Hot Floor
Thermo Tec has the answer to your hot floor needs with the Kevlar muffler cover. The Kevlar side can handle continuous temperatures up to 1,100 degrees F while the mylar side is very tough and abrasion resistant. The Kevlar cover reduces radiant heat inside the vehicle, dampens muffler noise, improves life expectancy of muffler, and has a nice appearance. The kit includes stainless steel straps for easy installation.
Thermo Tec
(800) 274-8437
www.thermotec.com

Custom Truck Parts September 2009 Bumper
3. Night Vision Bumper
Fiberglass high-visibility bumpers for popular late-model trucks are now available from Ansani Designs. Not covers, these are direct replacements for factory bumpers. These bumpers are manufactured by hand using a combination of uni-directional fiberglass and ’glass mat along with polyester resin. The design incorporates mounting pods for three auxiliary lights (not included). The bumpers utilize factory mounts and brackets and come with Grade 8 hardware for a simple install. Applications are currently available for ’03-’07 Silverado/Sierra 2500HD, ’07-’09 Silverado/Sierra, ’08-’09 F-250, and ’07-’09 Tundra.
Ansani Designs
(480) 323-0504
www.ansanidesigns.com

Custom Truck Parts September 2009 Essex Keypad
4. No More Key Fob
The Essex Keypad Keyless Entry System can be used to operate factory installed door locks or one of the A1 Electric power door lock kits. The keypad allows keyless entry to a vehicle by entering a three- to eight-digit code. The door lock interface and optional outputs may require additional relays for operation, depending on vehicle make and model. The standard unit comes with horizontal mounting hardware. Order the vertical mounting option if you wish to mount the unit vertically on the door. It comes with a paper template for drilling holes. This unit interfaces with A1’s MES door lock systems without the addition of any relays or extra components.
A1 Electric Automotive Accessories
(888) 838-0506
www.a1electric.com

Custom Truck Parts September 2009 Toyo Tire
5. Tuff Tire
The Open Country H/T with Tuff Duty is the newest roller in Toyo’s lineup of tires. It has been specifically engineered for high-torque diesel pickup trucks that tow trailers or occasionally haul heavy loads. Tuff Duty three-belt construction reinforces and stabilizes internal tire construction while less tread-void results in a larger surface area for more rubber on the road. Also contributing to longer tread life and longer wear is a deeper tread depth, up to 17/32. At the same time, the tire delivers the exceptional ride comfort and balanced all-season performance of the traditional Open Country H/T. The new tire is available in five 16- to 17-inch sizes and all are load range E.
Toyo Tires
(800) 678-3250
www.toyotires.com


1  | 2  | Next

Ford Ranger Research
Ford Ranger The all new Ford Ranger is a good car, with practical styling to fit your lifestyle. Fuel efficiency is important and the 2010 Ranger with a 17.0 gallon main unleaded fuel tank 14.2 capacity gets 24 mpg, and is available in the following bodystyle: Trucks. Other similar vehicles are the Chevy Colorado and the Ford F150.

Related Photos

Latest News

 
LS327 Engine Swap In A 1973 Chevy C10 - The Parts Racer Runs Again!
How To Stuff A Carbureted LS327 And 4l65-E Into A C10... more
 
The 2009 Sport Truck Magazine Year In Review
12 Months Of Custom, 365 Days Of Cool... more
 
2007 Chevy Silverado - Fine In Five
Tahua Pena took a bone-stock '07 Silverado and completely transformed it in just five nights.... more
 
2000 Chevy S10 - Blackjack +1
Jerrad Keeling transformed this low-mileage Extreme into what he calls "Blackjack Plus One" as an homage to his 22-inch wheels... more
 
Lowered Trucks Of The 2009 SEMA Show - Web Exclusive
Check out the lowered trucks from the 2009 SEMA Show!... more
 
1988 Chevy 1500 - A Test Of Patience
It Takes A Helluva Man To Let A Truck Like This Stay Hidden... more
 
2009 Lay'd Out In The Park - Custom Truck Show
Chillin' In The park Was Never This Fun Before... more
 
 
Calendar Of Events - Road Trippin' - December 2009
Information on all of your favorite upcoming custom truck shows for December 2009... more
 
WheelWork's Tire Mount Mate - The Perfect Fit
This incredible tool will allow you to simulate your new wheels on your truck before you order them. Here's how it works.... more