1979 Chevrolet 1/2-Ton Stepside Project, Part IV
|
A perfect paint finish may require many hours of block sanding to get a metal surface that’s straight and without waves. Heed our words when we repeat that a slow, careful effort when performing these steps will be well rewarded in the end. After all, you don’t want an exterior finish that has imperfections. Despite the fenders being brand new we still checked the smoothness of the metal surface. After the metal is misted with paint, it’s time to use the long sanding blocks. Use slow, long, back-and-forth movements to ensure the long block is moving straight over the metal surfaces. If any black paint remains on the metal once you think you are done, you have a low spot. If you sand off the guide coat and the original primer coat and reach bare metal, you have a high spot. Either way, take your time and do it right. View Related Article
|
|
Ford Ranger Research
The all new Ford Ranger is a good car, with practical styling to fit your lifestyle. Fuel efficiency is important and the 2010 Ranger with a 17.0 gallon main unleaded fuel tank 14.2 capacity gets 24 mpg, and is available in the following bodystyle: Trucks. Other similar vehicles are the Chevy Colorado and the Ford F150.
|
|