Chevy S10 Engine Swap V8 Conversion Triangle Mount
|
13.The engine side of the mount was made from a 1/4-inch-thick steel triangle that was traced to match the motor mount holes on the block of our engine, as well as a 1-3/4-inch tubing and two pieces of 3/4-inch tubing, both 0.120-wall. The length of the 1-3/4-inch tubing corresponds with the size of our bushings as well as the width of the motor mount welded to the frame. The length of the 3/4-inch tubing determines how high our engine will sit. View Related Article
|
|