One of the most-asked question we get is "How do I get more power from my four-cylinder S-10?" We decided to compile a list of power parts for the anemic four-bangers, instead of telling you "swap in a small-block," which is our most common answer. Most of these parts can be installed with some simple handtools and a little common sense, while others might necessitate some involved tools or some welding skills. All of these parts will in one way or another give more performance, either by creating more ponies or helping you get it to the ground faster. Maybe you shouldn't look at a four-cylinder as a bad thing, but as a blessing in disguise. With gas prices skyrocketing right now, these small motors just take less go-go juice to run even when you put some power-adders on. The money saved at the pump could be used to buy new wheels or that NOS kit. Look, we know you might not be able to blow by your buddy on the track, but you can honk and wave as you pass him at the pump.

Accel Dis Coil
The DIS Coil features a "raised dome" construction, silicone magnetic steel core, along with optimized windings, and resistance to produce a higher energy spark for a more efficient fuel burn. It is compatible with OE computer-controlled ignition systems, as well as aftermarket capacitive discharge systems.

For more information, contact: ACCEL, (216) 688-8300, www.accel-ignition.com.

Accel Wires
For improved performance, check out ACCEL's 300+ Thundersport Ferro-Spiral Wire Sets. Each high-gloss 8mm double silicone wire is rated at more than 550 degrees F and features a precision-molded spark plug boot to fit the S-10. With a heavy-gauge, spiral-wound alloy conductor, resistance is only 150 Ohms per foot, providing maximum voltage potential at the spark plug. Wire colors are available in blue, red, or yellow.

For more information, contact: ACCEL, (216) 688-8300, www.accel-ignition.com

Airaid's Poweraid
The 2.2L Poweraid 1-inch throttle-body spacer features Poweraid's unique, patented helix bore design that spins the incoming air charge as it passes through the throttle-body spacer. This air charge contributes to better atomization of the air/fuel mixture at the combustion chamber. The end result is more part-throttle torque, improved midrange power, and overall combustion efficiency for more mpg. The new Poweraid is an easy bolt-on installation and comes complete with all mounting hardware and easy-to-follow instructions.

For more information, contact: AIRAID Premium Filters, (800) 498-6951, www.airaid.com.

B&M's Sport Shifter
B&M Racing & Performance's popular line of Precision Sport Shifters are now available for the Chevrolet S-10 pickup and provide street and off-road enthusiasts with pinpoint accurate shifts. CAD-designed for ultra-precise shifts, B&M's S-10 Precision Sport Shifters substantially shorten the shifter throw by 36 percent. The shifters are bolt-on replacements that require only simple handtools for quick installation.

For more information, contact: B&M, (818) 882-6422, www.bmracing.com.

Bosch Replacement Fuel Pump
The Robert Bosch Corporation has launched a comprehensive premium fuel pump program that uses advanced turbine technology to feed four-cylinders. They conform to OE dimensions and appearance, ensuring safe, easy installations.

For more information, contact: Bosch, (888) 715-3616, www.boschusa.com.

Centerforce Clutches
Centerforce has developed multiple clutch systems for the four-cylinder S-10. Depending on the vehicle model year, the company offers three styles of clutches. Centerforce I is designed for a mild upgrade over stock. Centerforce II is intended for mildly upgraded trucks for enhanced towing and more spirited driving. Dual Friction clutch sets are geared for heavier towing, most off-road four-wheeling, and weekend racing with extreme power upgrades.

For more information, contact: Centerforce, (928) 771-8422, www.centerforce.com.

DynoMax Mufflers
DynoMax offers a variety of exclusive muffler designs engineered to provide exceptional flow and appealing sound on a full range of popular performance applications. The brand's leading muffler designs are the DynoMax Ultra Flo muffler, featuring straight-through, single-tube routing and continuous-roving fiberglass, as well as the DynoMax Super Turbo muffler, which contains patented flow directors to channel exhaust flow for enhanced power.

For more information, contact: DynoMax Performance Exhaust, (734) 243-8000, www.dynomax.com.

Fidanza Flywheel
Aluminum flywheels for the '94-'03 2.2L Chevrolet S-10 are made from machined 6061 T6 aluminum and feature a 1050 steel friction surface with CNC-machined fastener holes and chamfers. The flywheels can be paired with just about any clutch disc material available from organic to Kevlar, and even sintered iron.

For more information, contact: Fidanza Engineering Corp., (440) 259-5656, www.fidanza.com.

Hays Clutch
The Hays line of clutch kits is specifically designed for severe usage; every unit is built to withstand extreme conditions and overuse. These kits are made in the U.S. and feature all-new parts. The clutches can significantly extend the service life when used in off-roading, towing, and performance street trucks.

For more information, contact: Hays, (216) 688-8300, www.haysclutches.com.

Holley TBI
Throttle-body fuel injection units for four-banger General Motors trucks-including California applications-are available from Holley Replacement Parts Division of Coltec Industries. These bolt-on replacements for GM original equipment TBI units are compatible with GM electronics and offer equal or better fuel economy.

For more information, contact: Holley, (270) 781-974, www.holley.com.

Hooker Muffler
Hooker Headers is proud to announce its all-new line of Tuned Flow performance mufflers with straight and slash-cut tips. With the new Hooker Tuned Flow mufflers, sound and flow can be adjusted to as much as 40 percent without disassembly. These units are designed to be welded on or clamped on at the end of tailpipes or header collectors. A universal U-channel mounting bracket makes for an easy installation on most applications. They come with a 2-1/2-inch inlet with either a 4-inch-diameter straight or slash-cut and a show-quality chrome finish.

For more information, contact: Holley, (270) 781-974, www.holley.com.

Hurst Shifters
The Hurst Competition/Plus Shifter is designed to provide a more positive and secure feel when shifting, and it incorporates a high-ratio pivot mechanism for approximately 30-percent-reduced knob travel, resulting in shorter, quicker shifts. Patented adjustable bias spring loads allow stick tension to be tailored for your preference, and positive gear stops prevent overshifting and internal transmission damage. It comes supplied with a chrome-plated bolt-on stick with a black knob and easily installed without any vehicle modifications.

For more information, contact: Hurst, (216) 688-8300, www.mrgasket.com.

K&N Fipk
With the addition of K&N's FIPK, horsepower, torque, and acceleration are improved with no effect on fuel economy. All K&N FIPK systems are 50-state legal and are compatible with OE computer and emissions controls. Also, K&N's Million Mile limited warranty backs the system's filter.

For more information, contact: K&N Engineering, (800) 213-4182, www.knfilters.com.

Royal Purple
Royal Purple makes synthetic products for every area of your 'Dime, including engine oils, transmission fluids, gear oil, coolant additives, fuel system cleaner, power steering fluid, grease, and penetrating lubricant. Synthetic fluids provide improved performance through a reduction in power-robbing friction.

For more information, contact: Royal Purple, (888) 382-6300, www.royalpurple.com

Nitrous Works Power Wing
The PowerWing nozzle kit from NitrousWorks, a Barry Grant company, delivers instant power to the Chevy S-10. With just a click of a button, 25 to 100 additional hp is available at wide-open throttle. This PowerWing nitrous kit is a complete, turnkey "wet" system that includes: a PowerWing nozzle; calibrated jets in increments of 25, 50, 75, and 100 hp; solenoids; stainless steel line and fittings; filter; hardware; instructions; 14-foot/4AN stainless steel bottle feed line; and a 10-pound capacity bottle.

For more informationnn, contact: NitrousWorks, (706) 864-8544, www.barrygrant.com

NOS PowerFogger
Nitrous Oxide Systems is announcing the availability of its PowerFogger Universal "wet" nitrous systems for four- and six-cylinder engines. This wet system provides 35 to 75 adjustable horsepower, using the NOS Soft-Plume fogger the air intake and comes with a micro-switch that reads wide-open throttle. This system comes complete with a 10-pound blue bottle, brackets, solenoids, Soft Plume fogger nozzle, braided hose, micro-switch, and everything needed for a clean and simple installation.

For more information contact: Nitrous Oxide Systems, (714) 546-0592, www.nosnitrous.com.

Pacesetter Headers
Pacesetter Performance Products announces the availability of 50-state-legal headers for the '94-'00 S-10 with the 2.2L four-cylinder engine. Designed to provide an increase in low- and midrange torque, these headers feature mandrel-bent, 1-1/2-inch-diameter primaries and a precision-formed collector. The primaries are sequenced into the collector for better cylinder scavenging and maximum power. The header also comes with a mandrel-bent extension to mate directly to the stock or stock replacement catalytic converter.

For more information, contact: Pacesetter Performance Products, (602) 266-1964, www.pacesetterexhaust.com.

Performance Distributors' Ignition
The Performance Distributors' kit consists of two Screamin' Demon coil packs and a set of Live Wire spark plug wires. This kit is for all four-cylinder S-series trucks from 1994 to 2003. The Screamin' Demon coil packs allow you to open up your plug gaps to 0.065-inch,thereby burning fuel more completely. The coils are epoxy filled, leading to improved heat transfer and vibration resistance. The Live Wire plug wires are approximately 1/2-inch in diameter and can withstand as much as 1,400 degrees F. Built with a very low resistance, Live Wires deliver every ounce of high-voltage spark that the Screamin' Demon coils produce and are available in red, blue, black, purple, and yellow.

For more information, contact: Performance Distributors, (901) 396-5782, www.performancedistributors.com.

Professional Products Fuel Pump
Get the fuel from the tank to the engine more efficiently with a new PowerFlow Electronic Fuel Pump from Professional Products. The PowerFlow Electronic Fuel Pump is a simple two-wire connection and is equipped with a stamped-steel housing, sturdy mounting tabs, and inlet/outlet fittings suitable for 5/16-inch fuel lines.

For more information, contact: Professional Products, (323) 779-2020, www.professional-products.com

Professional Products Filter
This Professional Products Hi-Tech Fuel Filter is 3 inches long by 2 inches around and flows as much as 160 gallons per hour, filters down to 10 microns, and handles as much as 60 psi. The lightweight aluminum Hi-Tech Fuel Filter has a replaceable filter element and resists corrosion inside and out. The filter is available in either fully polished or with a blue and red anodized housing.

For more information, contact: Professional Products, (323) 779-2020, www.professional-products.com.

Professional Products Regulators
Machined out of billet aluminum with a single 1/2-inch NPT inlet port and dual 0.375-inch NPT outlet ports, the Powerflow Plus is assembled with stainless steel hardware and comes with a polished stainless steel mounting bracket.

For more information, contact: Professional Products, (323) 779-2020, www.professional-products.com.

SplitFire Spark Plugs
SplitFire offers a comprehensive line of spark plugs for all S-series truck applications. The design allows a larger and quicker flame kernel to develop that is not blocked by the ground electrode. This helps improve the combustion of the air/fuel mixture.

For more information, contact: Splitfire, (800) 224-7584, www.splitfire.com.

STS Performance Package
STS Performance now has Power Packages for '94-'04 2.2L four-cylinder S-series trucks. The power packages feature a either triple-chrome-plated or powdercoated silver intake, a K&N filter, a new underdrive crank pulley, an underdrive alternator pulley, and a serpentine belt by Goodyear.

For more information, contact: STS Performance, (562) 531-6328, www.sportruckspecialties.com.

True Flow Foam Air Filter
True Flow foam air filters combine airflow capability and high filtration efficiency in a drop-in filter for your 'Dime. True Flow foam full-depth filters come with a lifetime warranty and are easy to wash and reuse. Follow the simple cleaning instructions included in the filter box at the suggested cleaning intervals and enjoy great filtration and airflow for the life of your vehicle.

For more information, contact: True Flow, (866) 999-9098,www.trueflow.com.

  • «
  • |
  • 1
  • |
  • 2
  • |
  • View Full Article