The Reinstall 1. Now it can...
The Reinstall
1. Now it can be put back in the truck but not before all the metal surrounds were removed from the factory board and placed in the HBBW piece. Most of the accessories that have a metal surround actually snap into it, so you have to use them.
2. Don't try this by yourself-get...
2. Don't try this by yourself-get help and carefully slip in the headliner through the window. Once you have it in the truck, you can let it sit on the headrest until you can wiggle under it and lift it up. We would recommend installing the dome light first-this will hold it up while you reinstall the rest of the trim.
3. Some of the butyl seal...
3. Some of the butyl seal around the window got balled up, so Rich filled in any gaps with new stuff. You can get this stuff at most auto supply stores.
4. Here are the 10mm nuts...
4. Here are the 10mm nuts that hold the back window in we talked about earlier in the story. Just tighten them down in an alternating pattern. That should keep you from possibly cracking the glass.
5. One last thing before we...
5. One last thing before we go: Be careful when putting the pillar trim on because the clips snap in with an upward motion, and if you slip, the clip will gouge the paint.
The Final Word
We don't expect you to paint this good from this story, but with the parts, stencils, and training videos Rich sells, you can feel confident enough to at least try, so get to painting!