Mooneyes, USA
Want something a little more nostalgic for the top of your shifter? Check out what Mooneyes has in its arsenal. These are just a sampling of what the company has to feed the old-school need. Each knob is a universal fit and comes with nylon self-threading bushings, set screws, and an Allen wrench. They also have a full line of clamp-on peep mirrors, so you can see the Man pulling up behind your ride.
(800) 547-5422
www.mooneyesusa.com

Air Ride Technologies
Check out Air Ride's kick-ass bolt-in StrongArm system for C10-series Chevy trucks. The system features tubular trailing arms manufactured from 2-inch DOM tubing, bolt-on tubular upper and lower shock crossmembers, bolt-on C-notches with upper air spring mounts built in, and an adjustable Panhard. All components install into factory holes and are powdercoated for durability. The system can be used with your OEM crossmember and, if desired, will allow use of standard shocks, billet adjustable shocks, or ShockWaves. On top of all that, you don't have to cut the bed floor.
(812) 481-4787
www.ridetech.com

Bruce Horkey's Wood and Parts
Have you installed a custom fuel cell in the bed of your truck? Then, check out this mirror-finished 316 stainless steel flush-mount gas cap that is 3 inches in diameter and only 0.080 inch thick at the edge. The flush cap opens and closes with a special key and seals with an O-ring seat. It comes with all mounting hardware and instructions for an easy installation.
(507) 831-5625
www.horkeyswoodandparts.com