2000 Chevrolet S10 Fuel Cell - Warning: Flammable!
9. Our S-10 has a KP Components link kit that needed to be mounted to the new crossmember. The pinion angle of the rearend was set at zero to line up the triangulated links correctly. Moses quickly cut out some brackets to match the spacing of the link ends. After they were cut to the correct size, they were bolted to the ends and then welded on. The muffler and evaporation canister were then welded to the crossmember. After that, the filler neck, fuel lines, and wiring harness were attached. Once all the welds cooled down, the fuel lines to the canister were strapped down.
View Related Article
|
|