Sport Truck Homepage

Building Chassis For Our 1967 Chevy C10 Rear Transmission Crossmember

14b. The rear transmission crossmember was made from 1/8-inch-thick sheetmetal and designed so that not only would the tranny be easily removed for service, but so that we could route the exhaust system through the chassis.
1967 Chevrolet C10 Custom Chassis Fabrication - Picking Up the Pieces

 14b. The rear transmission crossmember was made from 1/8-inch-thick sheetmetal and designed so that not only would the tranny be easily removed for service, but so that we could route the exhaust system through the chassis.  View Related Article

 

Car Research Guide