Sport Truck Homepage

2007 Chevrolet Tahoe Static Drop Loosening Upper Ball Joint

4. Use an 18mm socket to loosen the upper ball joint nut, but do not remove it. Back it off 1/4 to 3/8 of an inch. Then, use a sharp blow from a mallet to pop the taper loose. Repeat these steps using a 24mm socket on the lower ball joint.
2007 Chevrolet Tahoe Static Drop - Tahoe On The Down-Low

 4. Use an 18mm socket to loosen the upper ball joint nut, but do not remove it. Back it off 1/4 to 3/8 of an inch. Then, use a sharp blow from a mallet to pop the taper loose. Repeat these steps using a 24mm socket on the lower ball joint.  View Related Article

 

Car Research Guide