2007 Chevrolet Tahoe Static Drop - Tahoe On The Down-Low
18. The brake dust shield will need to be trimmed to clear the brake caliper. A good pair of snips or a grinder will make short work of this. With the dust shield trimmed, place it and the hub on the spindle, taking car to route the ABS sensor harness through the shield as shown. It's also a good idea to coat the hub/spindle interface with waterproof grease, which will make future disassembly a little less of a headache. Use the supplied nut on the M12 stud and two factory bolts to secure the hub.
View Related Article
|
|