2007 Chevrolet Tahoe Static Drop - Tahoe On The Down-Low
8. The passenger-side endlink is installed on the outside of its mount with a longer bolt. A spacer is used to prevent crushing the mount when the bolt is tightened. Remove the driver-side D-bushing, slide the sway bar to the right, and install the endlink bolts, but leave them loose for now. The driver-side D-bushing must be relocated 2 inches to the right in order to clear the bar's curve. There is one existing hole, but the other must be drilled, as shown. You can now reinstall the D-bushing and torque both driver and passenger sides to 50 lb-ft. View Related Article
|
|