Sport Truck Homepage

Baer Brakes Eradispeed Bigger Brake System Anchor Bracket Being Removed

The anchor bracket that holds the caliper needs to be removed from the back of the spindle. The factory bolts have a thread-locking compound on them, so you might need a breaker bar to bust them loose. There are two little caliper sliders that index the brake pads properly. You will need to retain those, along with the factory hardware, and transfer them to the new parts.
2004 Chevrolet Silverado Aftermarket Brakes Install - Short Stopping

 The anchor bracket that holds the caliper needs to be removed from the back of the spindle. The factory bolts have a thread-locking compound on them, so you might need a breaker bar to bust them loose. There are two little caliper sliders that index the brake pads properly. You will need to retain those, along with the factory hardware, and transfer them to the new parts.  View Related Article

 

Car Research Guide