Sport Truck Homepage

Supercharging An Automatic Dodge Ram Srt10 Removing Factory Intake

<strong>Part One: Engine Prep</strong><br>1. The install begins with the removal of the factory air intake, throttle body, throttle and cruise control cables, wiring harness, and vacuum lines. This enables the installer to remove the stock intake manifold. The stock manifold is removed using a combination of No. 30 Torx and 7/16-inch open-end wrenches.
Supercharging An Automatic Dodge Ram SRT10 - Blown Away!

 Part One: Engine Prep
1. The install begins with the removal of the factory air intake, throttle body, throttle and cruise control cables, wiring harness, and vacuum lines. This enables the installer to remove the stock intake manifold. The stock manifold is removed using a combination of No. 30 Torx and 7/16-inch open-end wrenches.  View Related Article

 

Car Research Guide