Custom 2000 Chevrolet S10 Retro Paintjob - Flake 'N' Bake
Part Three: Style It!
1. Once the paint on the body of our truck dried overnight, Pat Maxwell was able to lay out some graphics with plastic fine-line tape. We went with a scallop-type flame job, similar to what we have seen on other retro-style vehicles. To start, Pat outlined the outer scallop and then moved on to the flames. After the initial design was set, Pat continued it all the way down to the end of the bed. It was laid out in the same order with the straight scallops coming first, followed by the flames (inset). When the graphics were finished on the passenger side, Pat repeated them on the driver side by taking down a few measurements.
View Related Article
|
|