Sport Truck Homepage Sport Truck

Building A New Bed Floor For A 1967 C10 Puncturing Holes

4a. Once the bracing and compartments were fully welded into the bed, the floor metal had a ton of strategically placed 3/16-inch holes punched into it so that the floor could be welded to the bracing. After the welds are ground down, the floor will be completely flat(4a, 4b, 4c)
1967 Chevrolet C10 Custom Sheetmetal Bed Floor - Make Your Bed

 4a. Once the bracing and compartments were fully welded into the bed, the floor metal had a ton of strategically placed 3/16-inch holes punched into it so that the floor could be welded to the bracing. After the welds are ground down, the floor will be completely flat(4a, 4b, 4c)  View Related Article

 

Get Adobe Flash player

Car Research Guide