Sport Truck Homepage

Building A New Bed Floor For A 1967 C10 Inside Corners Of Bed

2. We decided early on with this project that we wanted to round the inside corners of the bed, and we wanted the front and rear bulkheads to match the width of the bedrails. This required us to weld in new bracing to widen the top edge of the tailgate skin and the front bulkhead, which we'd be able to weld the new sheetmetal paneling to. A straight edge was used to make the bracing level and square to the bed, while providing enough of a recess for sheetmetal to sit on top of and to remain flush to the bedrails.
1967 Chevrolet C10 Custom Sheetmetal Bed Floor - Make Your Bed

 2. We decided early on with this project that we wanted to round the inside corners of the bed, and we wanted the front and rear bulkheads to match the width of the bedrails. This required us to weld in new bracing to widen the top edge of the tailgate skin and the front bulkhead, which we'd be able to weld the new sheetmetal paneling to. A straight edge was used to make the bracing level and square to the bed, while providing enough of a recess for sheetmetal to sit on top of and to remain flush to the bedrails.  View Related Article

 

Car Research Guide