Sport Truck Homepage Sport Truck

Chopping An S10 Without Using Custom Glass Saw Cutting A Pillars

3. The saw was also used to cut the A-pillars. John recommends using the cut-off wheel to make a small slit on the sheetmetal just big enough to get the saw blade in. If you try and plunge the blade into the roof without this initial cut, you could possibly bend up the area and, in turn, require some hammer and dolly work.
Chevrolet S10 Stock Glass Chop Top - A Little Off the Top

 3. The saw was also used to cut the A-pillars. John recommends using the cut-off wheel to make a small slit on the sheetmetal just big enough to get the saw blade in. If you try and plunge the blade into the roof without this initial cut, you could possibly bend up the area and, in turn, require some hammer and dolly work.  View Related Article

 

Get Adobe Flash player

Car Research Guide