Sport Truck Homepage Sport Truck

2001 Dodge Dakota Removing Hardware

1. Because we were changing the front coils and the shock runs right up the middle, they had to come out. A 15mm up top and a 10mm on the bottom were needed to remove the hardware. A 21mm socket was used to remove the tie rod ends, and a 16mm was used for the sway bar endlinks.
2001 Dodge Dakota Static Drop - Dakota Down

 1. Because we were changing the front coils and the shock runs right up the middle, they had to come out. A 15mm up top and a 10mm on the bottom were needed to remove the hardware. A 21mm socket was used to remove the tie rod ends, and a 16mm was used for the sway bar endlinks.  View Related Article

 

Get Adobe Flash player

Car Research Guide