Classic Truck Parts Buyer's Guide 2008 - Old Trucks, New Parts

Classic Tube's pre-made stainless braided hose is available in even-numbered inches from 6 to 60 inches, and build your own hose ends by selecting from a wide variety of Classic Tube screw-in fittings. Classic Tube also has a huge selection of pre-bent replacement hard lines, bulk tubing, tools, and accessories.
Classic Tube
(800)882-3711
www.classictube.com

Coker has just added the new American Classic Narrow Whitewall like this one from the company's huge selection of classic and vintage rollers. If you are looking for vintage bias-ply, nostalgia-style radial tires or even some whites for your bicycle, Coker Tire has them.
Coker Tire
(800)251-6336
www.coker.com

Early Classic Enterprises overdrive conversion kit allows you to install a 700-R4 or a 4l60 overdrive transmission into your truck. ECE provides a new crossmember and mount, stainless shift linkage, adjustable vacuum switch, pressure switch, solenoid, and all necessary wiring and hardware to complete your conversion, properly. You will gain deeper First gear starts for quicker acceleration and a 30-percent Overdrive on the top end for better fuel economy.
Early Classic Enterprises INC.
(888)777-0395
www.earlyclassic.com

Eaton offers a full line of Truck and SUv springs with applications ranging from antique and classic to present-day trucks. Stock ride height, also as much as 3 inches of lift or lowering, is available.
Eaton Detroit Spring
(313)963-3839
www.eatonsprings.com

These new Edelbrock E-Force Supercharger Kits deliver seat-of-the-pants performance right off idle. At 5 pounds of boost, these kits are capable of more than 500 hp and 487 lb-ft of torque on premium pump gas. Each kit includes the Magnuson fifth-generation MP122 supercharger, packaged with Edelbrock intake manifold, drivepulleys, belt, and all necessary items to install on your small-block Chevy.
Edelbrock
(800)416-8628
www.edelbrock.com

Gibson has released a new line of Superflow Mufflers, featuring Gibson's CFT (Convergent Flow Technology). CFT is a solid internal construction, chambered and louvered design, with no packing to blow out or baffles that can become brittle. CFT mufflers are available in aluminized steel or T-304 stainless steel and backed by a lifetime limited warranty.
Gibson Performance Exhaust
(800)528-3044
www.gibsonperformance.com

GM Performance Parts has a plug-and-play engine controller kit for lS2, lS3, and lS7 crate engines. Each system enables you to simply plug in the factory-validated harness connections into the new controller and start the engine-no recalibration or tuning is required.
GM Performance Parts
www.gmperformanceparts.com

Holley's HP mechanical fuel pumps for small- and big-block Chevy and small-block Ford engines. These pumps are CNC-machined from 6061-T6 billet aluminum and flow 170 gallons per hour, capable of fueling a 1,000hp engine. The threevalve design uses high-pressure check valves for stable fuel pressure and high-volume flow throughout the engine's rpm range.
Holley Performance Products
(800)465-5391
www.holley.com

Add the convenience and reliability of a new ididit tilt column to your '60-'78 Chevy. Each column comes standard with eight-position tilt, self-canceling turn signals, four-way flashers, and a dress-up kit. Available finishes include paintable steel, chrome, black powdercoated, and brushed or polished aluminum.
Ididit INC.
(517)424-0577
www.ididitinc.com

Innovation Alley's new Double Cross steering wheel features a 15-5/8-inch-diameter billet aluminum ring that is wrapped in black, tan, or grayleather. The hub is likewise CNC-machined from 6061 billet aluminum and then polished to a high luster. The 16 spokes are motorcycle-style stainless steel that also features a high polish. The wheels fit most popular five-bolt wheel adapters.
Innovation Alley
(559)285-9750
www.innovationalley.net

Just Dashes '67-'72 dashpad nets you an area for three more gauges. This all-new dashpad uses your factory defroster vents and is available with or without speaker holes. The pad is constructed from durable polyurethane foam over a steel insert and is covered in vinyl, using the company's Thermo vacuum Forming process. It is easy to install, using the original factory mounting points, and will accept any brand of 2-1/16-inch outside-diameter gauge.
Just Dashes
(800)247-3274
www.justdashes.com

Need something to hold onto while you drive your classic Dodge truck? liteGrip has the answer in the company's anodized knob sets. These knobs are hard-anodized, laser-engraved, and made from T6 aluminum. You will be stylin' in about 10 minutes with simple and easy installation. Most classic years are available.
Litegrip
(801)546-1375
www.Litegrip.com