1973 Chevy C10 Ls1 Engine Swap Beehive Valve Springs
|
17a.Finally, we installed our new Comp Cams Beehive valve springs , and since the LS comes with hydraulic lifters we simply torqued to 22 lb-ft without needing to check the valve lash. The Beehive springs are good for up to 0.625 inch valve lift and 125 pounds of seat pressure at 1.800 inches installed height, which is plenty of control for an even more aggressive cam design. The durability of these springs comes from the use of very high-end wire that is "micro peened" to stress-relieve the part. Put simply, these springs work and will last. View Related Article
|
|
|
|