P9205 Image Large
|
Install the new Crane roller rail rocker arms. Prior to firing up the engine, you will need to make the proper valve adjustments. Adjust the rocker arm nut until there is zero lash with the exhaust valve fully closed. To do so, tighten the rocker arm nut and with the other hand slowly spin the pushrod with your thumb and forefinger. Once the pushrod no longer moves freely, tighten the hex-head nut another half to full turn and tighten the set screw. Then rotate the engine until the intake valve has fully opened and repeat the zero lash procedure, as shown above, on the exhaust valve. Once the engine is ready to fire up, check for any oil leaks and listen for any possible squeaks or squeals which may be caused by something binding up or improperly installed. View Related Article
|
|
|
|